Integrated Programmable High-Temperature Furnace SXC-7.5-10

The integrated program-controlled high-temperature furnace, also known as the integrated program-controlled box-type electric furnace or integrated programmed muffle furnace, features a ceramic fiber inner chamber and high-temperature heating wires for energy efficiency and high performance. Its energy consumption is only one-third that of conventional high-temperature furnaces, with rapid heating capability. The outer shell is made of cold-rolled steel with spray coating, offering a lightweight design and weighing only one-fifth of traditional high-temperature furnaces.

The control system utilizes a fully automatic multi-band LTDE programmable instrument with adjustable heating rates. The PID+SSR system ensures synchronous and coordinated control, enabling consistency and reproducibility in any test or experiment. It includes automatic constant temperature and time control functions, along with secondary over-temperature protection for reliable and safe operation. The control panel is located below the chamber, and the furnace is integrated with pre-completed electrical connections between the furnace body and the temperature controller, allowing for immediate use upon power connection. It is an ideal high-temperature furnace for universities, research institutions, industrial and mining enterprises, and laboratories.

I. Product Technical Parameters

Temperature Range: 100 ~ 1000°C

Working Dimensions: 500*500*500 mm

External Dimensions: 790*860*1080 mm

Fluctuation: ±1°C

Display Accuracy: 1°C

Heating Rate: ≤30°C/min (adjustable to any rate below 30°C per minute)

Total Power: 7.5 kW

Power Supply: 380V, 50Hz

II. Temperature Control System

2.1 Temperature Measurement: K-type nickel-chromium/nickel-silicon thermocouple;

2.2 Control System: LTDE fully automatic programmable instrument with PID adjustment and display accuracy of 1°C;

2.3 Electrical Components: Brand contactors and solid-state relays;

2.4 Time Control: Adjustable heating time, constant temperature time control, automatic shutdown upon reaching set time;

2.5 Over-Temperature Protection: Built-in secondary over-temperature protection device for dual safety;

2.6 Operation Modes: Full-range adjustable constant temperature operation; programmed operation.

III. Furnace Structure and Materials

3.1 Furnace Shell Material: Outer shell made of high-quality cold-rolled steel treated with phosphating and high-temperature spray coating in computer gray color;

3.2 Furnace Chamber Material: Constructed with high-radiation, low-thermal-mass ultra-lightweight fiber panels assembled on all six sides, resistant to rapid cooling and heating, energy-efficient and high-performance;

3.3 Insulation Method: Air cooling;

3.4 Thermocouple Port: Thermocouple enters from the upper rear of the furnace body;

3.5 Terminal Blocks: Heating wire terminals located at the lower rear of the furnace body;

3.6 Controller: Positioned below the furnace body, with built-in control system and compensation wires connecting to the furnace;

3.7 Heating Element: High-temperature resistance wire.

IV. Included Technical Documentation and Accessories

4.1 Operation Manual

4.2 Product Warranty Card

V. After-Sales Service

5.1 Remote technical guidance for users

5.2 Timely provision of spare parts and accessories

5.3 Technical consultation and support during equipment use

5.4 Immediate response within 8 working hours upon receiving customer fault notifications

VI. Main Components

LTDE Programmable Control Instrument

Solid-State Relay

Intermediate Relay

Thermocouple

High-Temperature Heating Wire